Medtech32

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016).

Medtech is pleased to make available for download the Medtech32 Version 9.3.5 Build 5199 release. This update contains several enhancements and a number of resolved issues that had been reported in the earlier builds.

Enhancements

• AIR – Australian Immunisation Register: Practices can send AIR claims for patients of all ages following expansion of the ACIR (Australian Child Immunisation Register).
• Medtech has ceased support for Medicare Payment Cheques. PDVC cheques are still supported and can still be entered into Medtech32.
• The signed consent field within the "My Health Record” has been removed since a copy of the signed consent form for assisted registration is no longer required.
• Patient Medications can no longer be printed when the flag in the INI file is set to ‘HASMEDISECURE=N.’ Scripts can still be printed if the flag is disabled but only without the MediSecure barcode.

Please refer to the release notes for further information.

Prerequisite: Your practice must be on Medtech32 Version 9.3.3 Build 4999 or above, prior to installing Version 9.3.5 Build 5199.

NOTE: My Health Record Update – Query Builder Update’ needs to be run again prior to or after installing Medtech32 Version 9.3.5 Build 5199. Please follow this link to the query builder. https://medtechglobal.com/au/support-au/mt32-downloads-au/useful-tools-and-documents-australia/

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016).

IMPORTANT: If your practice is currently running on the original release of Medtech32 Version 9.3.3 Build 4891 (January 2016 – Release 1), you MUST install both the Medtech32 Version 9.3.3 Build 4999 (April 2016 – Release 2) update and CDA Bridge Update (September 2016)

Prerequisite: Your practice must be on Medtech32 Version 9.3.1 Build 4711 or above, prior to installing Version 9.3.3 Build 4999.

This update contains several enhancements and a large number of the resolved issues previously reported in earlier builds.

NOTE: Immunisation workflow changes MAY AFFECT your workflows and procedures. Please refer to the User Release Notes for more details.

NOTE: The following is a summary of the key enhancements in the Immunisation module in Medtech32 Version 9.3.3:

Medtech32 Update Version 9.3.3 Build 4999 (April 2016) includes enhancements to support the ‘No Jab No Pay’ budget measure

• Increase age restriction to 19 for transmission to ACIR
• Allow multiple immunisation schedules including catch up schedules to be selected for each patient
• Immunisation due dates can be calculated based on either patient’s DOB or patient’s schedule activation date
• Allow nurses to transmit to ACIR using the logon location’s Medicare Ancillary Provider Number
• Introduction of ATSI vs non-ATSI immunisation schedules
• Introduction of ‘All Immunisations’ tab listing all immunisations including those from schedules and single-shots
• Introduction of ‘Sequence No.’ field and related validation based on NEHTA’s My Health Record requirements
• Immunisation Exemption Medical Contraindication Form (IMMU11) can be downloaded as an outbox document template from our website separately
• These changes have been updated in Medtech Master eLearning videos. Go to Metech Master ► Clinical ► Patient Manager to view the updated videos

Medtech32 Update Version 9.3.3 Build 4999 (April 2016 – Release 2) includes the New Certificate for ReturnToWorkSA:

Please refer the MT32 Technical Release Notes – V9.3.3 B4983_SA eWMC to unregister the expired certificate and register the new certificate in order to continue to submit claims.

Medtech32 Update Version 9.3.3 Build 4999 (April 2016 – Release 2) includes several Resolved Issues: 

• Medicare Payments are now listed in Banking Deposit Lists
• Fully paid IMC batches are no longer displayed in “Outstanding Batches” tab
• Performance delay when repeating medications has been resolved
• Inbox – ‘Out of Memory’ errors
• Quick Bill amount no longer shown as ‘zero’ in Invoice screen
• SMS Compose Window no longer retains the previous message
• Formatting is retained when Outbox Documents are sent via email
• PCEHR – Error while saving Health Records

NOTE: Please ensure that the User Release Notes are read by all staff, and that each process of the Installation Checklist has been fully completed.

File Attachments

1. Medtech32 Version 9.3.3 Build 4999 Update (EXE)

2. Medtech32 User Release Notes - Version 9.3.3 Build 4999 (April 2016 – Release 2) (PDF)

Contains detailed functional changes, setup instructions, and known issues (if any). Intended for practice managers and Medtech32 users

3. Medtech32 Technical Release Notes - Version 9.3.3 Build 4999 (April 2016 – Release 2) (PDF)

Contains detailed technical changes, upgrade instructions, and known issues (if any). Intended for IT technicians

4. Medtech32 Installation Checklist - Version 9.3.3 Build 4999 (April 2016 – Release 2) (PDF)

Step by step checklists containing MANDATORY prerequisite, installation, and postrequisite requirements for Server, Clients, and Briefcase Laptops. Intended for practice managers and IT technicians

5. Medtech32 Technical Release Notes - Version 9.3.3 Build 4999_SA eWMC (PDF)

Step by step instructions to unregister the expired WorkCover Certificate and register the new WorkCover certificate in order to continue to submit claims.

6. Medtech32 CDA Bridge Release Notes (September 2016) (PDF)

7. CDA Bridge installer (EXE)

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016).

This update provides several new features including ECLIPSE, After Hours - Auto Billing, Consolidated Account, eRx-Medtech32 Integration Service and Medtech Fax Service. It also includes a large number of resolved issues and enhancements, and details changes made to the Medtech32 application.

Pre-requisite: Your practice must be on Medtech32 Version 9.3.0 Build 4620 or above, prior to installing Version 9.3.1 Build 4711. This Update contains several enhancements and a large number of those resolved issues that had been reported in the earlier builds.

NOTE: Some of the workflow changes MAY AFFECT your business workflows and procedures, such as ‘the rules to Enable or Disable the Resubmit Invoice and Apply Actions to the Services buttons in the View IMC Batch window have been redefined based on the status of the Invoice, within the View IMC Batch window’ as well as the new change of the ‘View Batch Report(s) button in the View Batch window being replaced with two new buttons – Processing Report and Exception Report. Please refer to the Non-Technical Release Notes for more details.

• HL7 - CDA & MDM Message Formats – provides the ability to import HL7 CDA or MDM messages through the Message Transfer Utility
• Message Transfer - File Format Label Change – the label of the File Format ‘NEHTA HL7 (D)’ in the ‘View Configuration’ window has been renamed as ‘eHealth HL7 MDM (D)’.
• Health Assessment - MBS Item Label change – MBS Item numbers for the Health Assessment have been updated.
• View IMC Batch - Rules Redefined – rules to Enable or Disable the ‘Resubmit Invoice’ and ‘Apply Actions’ to the Services buttons in the View IMC Batch window have been redefined - based on the status of the Invoice within the View IMC Batch window
• Consolidated Account window - Inactivated Transactions – The view update to ‘Include Inactive’ transactions from within the Consolidated Account window.
• View Batch window – replaced the View Batch Report(s) button in the View Batch window with two new buttons – Processing Report and Exception Report, to retrieve the individual reports separately

NOTE: Please ensure that the Non-Technical Release Notes and the Technical Release Notes, are read by all staff, and that each process of the Installation Checklist has been fully completed.

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016).

Medtech32 Version 9.3.0 Build 4620 Update (April 2015) is now available as a full DVD Upgrade and will be posted to your Practice in the next few days.

This update provides several new features including ECLIPSE, After Hours - Auto Billing, Consolidated Account, eRx-Medtech32 Integration Service and Medtech Fax Service. It also includes a large number of resolved issues and enhancements, and details changes made to the Medtech32 application.

Within the ‘Advanced Options’ section on the DVD you will find additional features and utilities, amongst them are:

• Medtech32 PenCAT Utility – MT2PenCAT – Updated utility to work with Pen Computer Systems CAT tool

• Upgrade to Interbase XE 5

Note: Some of the workflow changes due to the new enhancements MAY AFFECT your business workflows and procedures. Please ensure that you read the associated Release Notes.

Your Practice must be on Medtech32 Version 9.1.7 Build 4293 or higher, to be able to install this latest Medtech32 Release Version 9.3.0 Build 4620.

File Attachments:

1.       Medtech32 Installation Checklist - Version 9.3.0 Build 4620 (PDF)

• Step by step checklists containing MANDATORY prerequisite, installation, and post-requisite requirements for Server, Clients, and Briefcase Laptops
• Intended for Practice Managers and IT technicians

2.       Medtech32 Information for Release and Installation - Version 9.3.0 Build 4620 (PDF)

• Contains installation instructions, and a summary of the Release updates
• Intended for Practice Managers and IT technicians

 3.       Medtech32 Release Notes - Version 9.3.0 Build 4620 (PDF)

• Contains detailed functional changes, setup instructions, and known issues (if any)
• Intended for practice managers and Medtech32 users

4.       Medtech32 ECLIPSE Release Notes - Version 9.3.0 Build 4620 (PDF)

• Contains information on the new features – ECLIPSE and Consolidated Account
• Intended for practice managers and Medtech32 users

 5.       Medtech32 Release Notes - Version 9.3.0 Build 4620 MedtechGlobalHIService (PDF)

• Contains instructions on the installation of the MedtechGlobalHIService Installation
• Intended for Practice Managers and IT technicians

 6.       Medtech Fax Tech Release Notes - Version 9.3.0 Build 4620 (PDF)

• Contains instructions on the installation of the Medtech Fax Service Installation
• Intended for Practice Managers and IT technicians

  7.      Medtech MT2PenCAT Release Notes - Version 9.3.0 Build 4620 (PDF)

• Contains instructions on the installation of the Medtech MT2PenCAT Installation
• Intended for Practice Managers and IT technicians

  8.      Medtech32 RxMedical Clinical Link (PDF)

• Contains instructions on the installation of the RxMedical to Medtech32 Clinical Link Installation
• Intended for Practice Managers and IT technicians

If you would like an advance copy of this Release, please contact the Medtech Helpdesk to arrange this for you.

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016).

Pre-requisite: Your practice must be on Medtech32 Version 9.2.1 Build 4494 or above, prior to installing Version 9.2.2 Build 4566.

This Update contains resolution to the following issues reported in the earlier builds: ‘Outbox Word document (embedded with Legacy Form Controls) issue’, ‘Outbox Mismatch issue’, ‘Appointment SMS Reminder issue’ and ‘Batching duplicate entry issue’.
In order to comply with the 2014 Client Adapter, the following statement, declaration and reports have also been modified:

• Bulk Bill Assignment Advice
• Lodgement Advice
• Medicare Online DB1 Declaration
• Statement of Claim and Benefit Payment

NOTE: Some of the workflow changes MAY AFFECT your business workflows and procedures, such as ‘HL7 PDF Implementation’ to convert Word documents as PDF files before sending through Message Transfer Utility using HL7 Messaging Platform. Please refer to the User Release Notes for more details.

NOTE: The following are a summary of the key enhancements in Medtech32 Version 9.2.2:

• The issue of ‘Word documents with Legacy Form Controls via Message Transfer utility using ‘HL7’ messaging platform were transmitted incorrectly’ is resolved with this upgrade. Medtech has introduced an option to convert Word documents as PDF files before they are sent via Message Transfer.
• The Subject of the Outbox document specified in the More tab will now be transmitted to the external providers / agencies when sending through Message Transfer Utility using the message platform Argus (PIT).

Your practice must be on Medtech32 Version 9.2.1 Build 4494 or above, to be able to install this latest Medtech32 Release Version 9.2.2 Build 4566.

NOTE: Please ensure you download and READ THROUGH both User Release Notes and Technical Release Notes, and COMPLETE EACH STEP in the Installation Checklist.

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016).

Pre-requisite: Your practice must be on Medtech32 Version 9.2.0 Build 4361 or above, prior to installing Version 9.2.1 Build 4494.

WARNING: If you have installed Version 9.2.1 Build 4494 prior to 19 December 2014, you MUST download the latest Release 2 and install it on top of the older Version 9.2.1 Build 4494.

This Update contains OVER 40 major performance, stability, and workflow enhancements across many modules in Medtech32, many of which were resolved thanks to the assistance from practices who have already upgraded to Version 9.2.0. All practices should upgrade to Medtech32 Version 9.2.1 Build 4494 AS SOON AS POSSIBLE.

NOTE: Some of the workflow changes MAY AFFECT your business workflows and procedures, such as reverting the default Filter options in Provider Inbox, and re-enabling the Template dropdown box in Patient Palette One-Off SMS. Please refer to the User Release Notes for more details and amend your practice policies accordingly (if applicable).

NOTE: The Scanning module has been enhanced to allow each user to have different Scanning configurations. If you Practice uses the Scanning module, you MUST configure the Scanning configurations for each user who will be scanning, as well as reconfigure any Scheduled Tasks for 'Auto Load from Folder' to ensure your scanning process will continue to function properly. Please refer to the Technical Release Notes for more details and amend your practice policies accordingly (if applicable).

NOTE: The following is a summary of the critical scanning rotation bug that was resolved in Version 9.2.1:

• It has been reported on some occasions that if the a scanned document is rotated using the "Rotate Page" button in Inbox, the scanned document may become corrupted. This issue was introduced in Medtech32 Version 9.2.0 due to the upgrade of the underlying imaging component, and does not affect practices who are still running on Version 9.1.7 or below.

• Instructions for Practices on Version 9.2.0 or above

If your practice is currently running on Medtech32 Version 9.2.0, please instruct all users to stop using the "Rotate Page" button in Inbox until your practice has been successfully upgraded to Version 9.2.1.

While you are running on Medtech32 Version 9.2.0, if any of your users have or might have used the "Rotate Page" button in Inbox, or you have encountered any scanned documents that cannot be opened after upgrading to Version 9.2.0, please contact the Medtech Helpdesk on 1800 148 165 for assistance as soon as possible. Our support staff will guide you through to run the Missing Scan Utility, which was released in Version 9.2.1, to detect if there are indeed any corrupted scanned documents. The utility will generate a list of corrupted scanned documents (if any), such that you can inactive the corrupted Inbox record and rescan the original hardcopy. In case you no longer have the original hardcopy, it might still be possible to recover the original Inbox record from your database backup if a healthy copy of the scanned document was included in your daily database backup prior to the user using the "Rotate Page" button on the affected record.

• Instructions for Practices on Version 9.1.7 or below

If your practice is still running on Medtech32 Version 9.1.7 or below, please upgrade directly to Version 9.2.0 and then to 9.2.1.  You must use 9.2.1 not 9.2.0 as your production software.

NOTE: Please ensure you download and READ THROUGH both User Release Notes and Technical Release Notes, including the 'Known Issues' section, and COMPLETE EACH STEP in the Installation Checklist.

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016).

The Medtech32 Version 9.2.0 Build 4361 Update (August 2014- Release 4) is now available as a full DVD Upgrade and will be posted to your Practice in the next few days, in a State wide staged rollout.

This Update contains major performance, stability, and workflow enhancements across many modules in Medtech32. This release also contains the Event Summary, eReferral ability, CUP1 changes, as well as eRx changes for the NPDR.

Within the ‘Advanced Options’ on the DVD you will find additional features and utilities, amongst them are the:

• Medtech32 Pencat Utility – MT2PenCat
  • Designed to work with Pen Computer Systems CAT tool.
• Verify Accounts Utility
  • Practices experiencing Accounting issues, should upgrade as soon as possible to use this enhanced utility.
• Upgrade to Interbase XE 5

NOTE: Some of the workflow changes MAY AFFECT your business workflows and procedures, such as changes to the "resubmit" and the "inactive" rules for Medicare and OVA batches/vouchers. Please ensure that you read the associated Release Notes. Included in this Update are also items from Medtech32 V9.1.7 and these entries are identified as such, in the accompanying Medtech32 V9.2.0 Release Notes.

Your practice must be on Medtech32 Version 9.1.4 Build 4071 or above, to be able to install this latest Medtech32 Release Version 9.2.0 Build 4361.

File Attachments:

1. Medtech32 Installation Checklist- Version 9.2.0 Build 4361
   • Step by step checklists containing MANDATORY pre-requisite, installation, and post-requisite requirements for Server, Clients, and Briefcase Laptops.
   • Intended for Practice Managers and IT technicians.
2. Medtech32 Information for Release and Implementation - Version 9.2.0 Build 4361
   • Contains installation instructions, and a summary of the Release updates.
   • Intended for Practice Managers and IT technicians.
3. Medtech32 User Release Notes - Version 9.2.0 Build 4361
   • Contains detailed functional changes, setup instructions, and known issues (if any).
   • Intended for practice managers and Medtech32 users.
4. Medtech32 Release Notes - Version 9.2.0 Build 4361 HI Service
   • Contains detailed functional changes, setup instructions for eReferrals, and Event Summaries.
   • Intended for practice managers and Medtech32.

Note: Additional Release Documentation and Technical Documents may be found in the Documentation folder on your Medtech32 DVD.

The Medtech32 Version 9.1.7 Build 4293 Update (May 2014- Release 4) is now available on our web site for download.

WARNING: If you have downloaded Version 9.1.7 Build 4293 prior to 30 May 2014, you MUST download the latest Release 4 and install it on top of the older Version 9.1.7 Build 4293.
This Update contains OVER 40 major performance, stability, and workflow enhancements across many modules in Medtech32. All practices should upgrade to Medtech32 Version 9.1.7 Build 4293 AS SOON AS POSSIBLE.

NOTE: Some of the workflow changes MAY AFFECT your business workflows and procedures, such as changes to "resubmit" and "inactive" rules for Medicare and OVA batches/vouchers, “backdate" rules for payments/credits/refunds, "modify" rules for invoices/payments/credits/refunds, and the introduction of "audit" logs for accounts and batching. Please refer to the Release Notes for more details and amend your practice policies accordingly (if applicable).

This Update also contains a revised version of Verify Account Utility, over 20 stability enhancements on memory and exception errors, printer handling enhancements on Windows default printer, as well as performance enhancements such as Scanning and viewing of inbox scanned documents, search by Patient Number, Online Patient Verification (OPV), Enhanced Primary Care (EPC}, and Medication Interactions.

NOTE: Please ensure you download and READ THROUGH the Release Notes, including the 'Known Issues' section, and COMPLETE EACH STEP in the relevant Checklists.

NOTE: Your practice must be on Medtech32 Version 9.1.4 Build 4071 or above, prior to installing Version 9.1.7 Build 4293.

File Attachments:

1. Medtech32 Version 9.1.7 Build 4293 Update - Standard Version
2. Medtech32 Version 9.1.7 Build 4293 Update- Debug Version
   • Streamlined version of Medtech32 debug tool - non-critical errors will no longer popup in order to minimize user disturbance.
   • For sites that have been experiencing frequent access violation and out of memory errors, it is recommended to deploy the Debug Version for further troubleshooting.
   • If you are planning to install the Debug Version,please notify the Medtech Helpdesk such that your customer record can be updated accordingly.
3. Medtech32 Installation Checklist- Version 9.1.7 Build 4293
   • Step by step checklists containing MANDATORY pre-requisite, installation, and post-requisite requirements for Server,Clients, and Briefcase Laptops.
   • Intended for practice managers and IT technicians.
4. Medtech32 Technical Release Notes- Version 9.1.7 Build 4293
   • Contains detailed technical changes, upgrade instructions, and known issues (if any).
   • Intended for IT technicians.
5. Medtech32 User Release Notes - Version 9.1.7 Build 4293
   • Contains detailed functional changes, setup instructions, and known issues(if any).
   • Intended for practice managers and Medtech32 users.

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016)

The Medtech32 Version 9.1.4 Build 4071 Update (September 2013) is now available on our web site for download.

NOTE: A Debug Version of Medtech32 is also available for download. Please DO NOT INSTALL the Debug Version unless instructed by the Medtech Helpdesk.

This Update contains major performance, stability, and workflow enhancements across many modules in Medtech32, as well as many other changes and enhancements.  All practices should upgrade to Medtech32 Version 9.1.4 Build 4071 AS SOON AS POSSIBLE.

NOTE: Some of the workflow changes MAY AFFECT your business workflows and procedures, such as changes to "resubmit" and "inactive" rules for Medicare and DVA batches, "unmatched" provider handling for incoming PIT and HL7 messages, and multiple locations setup for eRx and ManageMyHealth^© SMS.  Please refer to the Release Notes for more details and amend your practice policies accordingly (if applicable).

This Update also contains changes and enhancements for NEHTA PCEHR in both Medtech32 and CDA Bridge, including the introduction of Assisted Registration, Prescription and Dispense View (NPDR), Medicare Information View (MBS, PBS/RPBS, ACIR, AODR), and Observation View (BMI, Height, Weight, Head Circumference).

NOTE: You MUST INSTALL CDA Bridge Update (September 2013) if your practice is currently using or planning to start using any NEHTA functionalities such as HI Service and PCEHR.

Please ensure you download and read the Release Notes prior to running this update:
MT32 Release Notes - V9.1.4 B4071
MT32 Release Notes - V9.1.4 CDA Bridge

NOTE: Your practice must be on Medtech32 Version 9.1.3 Build 3992, prior to installing Version 9.1.4.

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016)

The Medtech32 Version 9.1.3 Build 3992 Update (July 2013) is now available on our web site for download.

NOTE: A Debug Version of Medtech32 is also available for download. Please DO NOT INSTALL the Debug Version unless instructed by the Medtech Helpdesk.

This Update contains major performance and stability enhancements across many modules in Medtech32.  All practices should upgrade to Medtech32 Version 9.1.3 Build 3992 AS SOON AS POSSIBLE.

This Update also contains changes and enhancements for NEHTA PCEHR in both Medtech32 and CDA Bridge, including Download CDA Document, Generate and Upload Shared Health Summary, Audit View, and Representative View.

NOTE: You MUST INSTALL CDA Bridge Update (July 2013) if your practice is currently using or planning to start using any NEHTA functionalities such as HI Service and PCEHR.

For practices who use Briefcasing, the new Briefcase Monitor can optionally be installed on the Medtech32 Server to automatically stop a pre-defined list of Windows Services that might be accessing the Medtech32 databases and thus preventing exclusive access to the databases when users attempt to run Briefcase Complete Checkout.

NOTE: You should install Briefcase Monitor Update (July 2013) ONLY ON the Medtech32 Server.  Please DO NOT INSTALL this update on the Briefcase Laptops.

Please ensure you download and read the Release Notes prior to running this update:
MT32 Release Notes - V9.1.3 B3992
MT32 Release Notes - V9.1.3 CDA Bridge
MT32 Release Notes - V9.1.3 Briefcase Monitor

NOTE: Your practice must be on Medtech32 Version 9.1.2 Build 3915, prior to installing Version 9.1.3.

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016)

The Medtech32 Version 9.1.2 Build 3915 Update (April 2013) is now available on our web site for download.

This Update contains changes and enhancements for NEHTA PCEHR in both Medtech32 and CDA Bridge, including Validate Patient's PCEHR Status, Download CDA Document, Generate and Upload Shared Health Summary, Audit View, and Representative View.

Please ensure you download and read the Release Notes prior to running this update.

NOTE: Your practice must be on Medtech32 Version 9.1.1 Build 3893, prior to installing Version 9.1.2.

Please contact Customer Support for a copy of the Release Notes.

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016)

The Medtech32 Version 9.1.1 Build 3893 Update (March 2013) is now available on our web site for download.

This Update contains major resolutions on Patient Palette mismatch issues, access violation and out of memory errors, Scanning crashes and performance issues, ManageMyHealth™ SMS and Appointment Reminder issues, plus the new version of NSW WorkCover Medical Certificate,  and a number of other changes and enhancements.

Please ensure you download and read the Release Notes prior to running this update.

NOTE: Your practice must be on Medtech32 Version 9.1.0 Build 3835, prior to installing Version 9.1.1.

MPORTANT: Starting from 01 Apr 2013, the "built-in" NSW WorkCover form within Medtech32 Version 9.1.0 or below is no longer accepted by WorkCover NSW.

Please contact Customer Support for a copy of the Release Notes.

File Attachments:

IMPORTANT: All previous versions of CDA Bridge are superseded by CDA Bridge Update (September 2016), which is released with Medtech32 Version 9.3.3 Build 4999. Please upgrade to Medtech32 Version 9.3.3 Build 4999 and install the latest CDA Bridge Update (September 2016)

The Medtech32 Version 9.1.0 Build 3835 Update (January 2013) is now available on our web site for download.

This Update contains:

a) NEHTA CDA Bridge Multiple Locations Handling (New Certificate Installer)

b) NEHTA CDA Bridge Concurrent Requests Handling

Please ensure you download and read the Release Notes prior to running this update.

NOTE: Your practice must be on Medtech32 Version 9.0.0 Build 3794, prior to installing Version 9.1.0.

Please contact Customer Support for a copy of the Release Notes.

File Attachments:

The Medtech32 Version 7.4.0 Build 2857 Update (June 2010) is now available on our web site for download. This Update contains major resolutions in the Patient Account, Consultation, Medication, and Family Social History modules, plus the new version of WorkCoverSA Electronic WorkCover Medical Certificate.

Please ensure you download and read the Release Notes prior to running this update.

NOTE: The WorkCoverSA Electronic WorkCover Medical Certificate Update will be posted separately on CD to sites in South Australia.

Please contact Customer Support for a copy of the Release Notes.

File Attachments:

The Medtech32 Version 7.3.0 Build 2686 Update (December 2009) is now available on our web site for download. This Update contains major performance enhancements in the Patient Account and Batching modules, and a number of other changes and enhancements.

Please ensure you download and read the Release Notes prior to running this update.

Please contact Customer Support for a copy of the Release Notes.

File Attachments:

The Medtech32 Version 7.2.0 Build 2667 Update (November 2009) is now available on our web site for download. This Update contains the new Medicare Bulk Billing Incentive for Diagnostic Imaging Services, and a number of other changes and enhancements.

Please ensure you download and read the Release Notes prior to running this update.

Please contact Customer Support for a copy of the Release Notes.

File Attachments:

The Medtech32 Version 7.2.0 Build 2589 Update (September 2009) is now available on our web site for download. This update contains a number of enhancements to the product that Medtech32 practices have been requesting.

Please ensure you download and read the Release Notes prior to running this update.

Please contact Customer Support for a copy of the Release Notes.

File Attachments:

Medtech32 Version 7.1.0 [Build 2540 Update], dated July 2009, is now available for download.

This update contains a large number of resolutions for historical problems that Medtech32 practices have been experiencing.

Please ensure you download and read the Release Notes prior to running this update.

Please contact Customer Support for a copy of the Release Notes.

File Attachments: